According to our (Global Info Research) latest study, the global Automotive Motor Core market size was valued at US$ 4473 million in 2025 and is forecast to a readjusted size of US$ 8204 million by 2032 with a CAGR of 8.9% during review period.
The automotive motor core in this report refers specifically to the automotive drive motor core.
The drive motor core is one of the core components of the drive motor of electric vehicles and hybrid vehicles, and is mainly used in the stator and rotor parts of the motor. The core is usually made of highly magnetic silicon steel sheets (also known as electrical steel sheets) stacked together. This material has excellent electromagnetic properties and low iron loss characteristics, which can effectively improve the efficiency and power density of the motor. The main function of the drive motor core is to guide the magnetic flux when the motor is working, reduce the magnetic flux loss, and establish a strong magnetic field between the stator and rotor of the motor, thereby realizing the conversion of electrical energy and mechanical energy. In the manufacturing process, the stamping, lamination and insulation treatment of the core are very important, which directly affects the performance, noise and heat dissipation efficiency of the motor. With the rapid development of the new energy vehicle market, efficient, lightweight and low-loss drive motor cores have become the key direction of motor technology innovation.
Key Findings
Stator cores and rotor cores constitute the two fundamental product categories of the Automotive Motor Core market
Electrified vehicle production is the primary downstream demand base for high-performance Automotive Motor Core products
China has developed into a major global demand and manufacturing cluster for automotive motor cores
Thin electrical steel, high-precision stamping and advanced bonding technologies are becoming increasingly important
Supplier competitiveness increasingly depends on tooling, process engineering, customer qualification and localized mass-production capabilities
Market Trends
The Automotive Motor Core industry is evolving toward thinner electrical-steel laminations, lower magnetic loss, higher dimensional precision and increasingly sophisticated lamination-fixation technologies. As automotive drive motors move toward higher rotational speed, higher power density and improved system efficiency, motor-core manufacturers are required to control burrs, concentricity, stacking accuracy and magnetic performance at progressively tighter tolerances. Conventional interlocking and welding remain important mass-production technologies, while adhesive bonding and self-bonding are gaining attention for applications requiring improved stacking factor, reduced localized magnetic deterioration and better NVH characteristics. At the same time, manufacturers are expanding from conventional stamping into integrated capabilities covering precision die design, high-speed stamping, stacking, rotor assembly and other value-added processes. Mitsui High-tec, for example, provides both interlocked and bonded lamination solutions and supports large-diameter, thin-sheet motor cores, while POSCO Mobility Solution has developed EMFree and self-bonding technologies for higher-efficiency motor cores.
Market Dynamics
Drivers
The expansion of electrified vehicle production remains the most important structural driver for the Automotive Motor Core market. Battery electric, plug-in hybrid, range-extended and hybrid vehicles all require electric traction systems, creating sustained demand for automotive stator and rotor cores. In 2025, electric cars represented close to 55% of new-car sales in China, while the country accounted for roughly six out of ten electric cars sold globally, supporting a large local production base for motors, e-drive systems and related precision components. In addition to vehicle volume growth, the transition toward higher-voltage platforms, compact e-drive systems and higher-speed motors is increasing the technical content and value requirements of Automotive Motor Core products.
Restraints
Automotive Motor Core production is highly dependent on capital equipment, precision tooling and manufacturing know-how. High-volume automotive programs generally require dedicated progressive dies, high-speed presses, automated stacking systems and stringent inspection processes. The move toward thinner electrical steel further increases the difficulty of controlling stamping deformation, burr height, flatness and material utilization. High-grade non-grain-oriented electrical steel is also an important cost component, exposing manufacturers to changes in raw-material pricing and availability. In addition, automotive qualification and validation cycles can be lengthy, limiting the ability of new entrants to convert installed capacity into qualified mass-production business within a short period.
Opportunities
Higher-performance motor architectures create opportunities beyond simple volume expansion. Thin-gauge laminations, low-loss cores, bonded or self-bonded structures, skewed rotor stacks and increasingly integrated stator and rotor assemblies provide additional avenues for differentiation. Advanced bonding processes are particularly relevant where customers seek higher stacking factors and reduced deterioration of electrical characteristics compared with conventional mechanical fixation. Regional localization also represents an important opportunity: suppliers able to replicate qualified tooling, process control and quality systems across China, Europe, North America and other automotive production hubs can better support global vehicle and motor programs. Mitsui High-tec already operates a global motor-core production network spanning Asia, Europe and the Americas, illustrating the importance of customer-proximity manufacturing in this industry.
Challenges
The principal challenge is to simultaneously achieve automotive-grade precision, high manufacturing yield and competitive cost at very large production volumes. Drive-motor platforms evolve rapidly, while core dimensions, steel grades, lamination thicknesses and joining technologies are frequently customized for individual vehicle or motor programs. This increases dedicated tooling investment and creates utilization risk if vehicle programs change or production volumes fall below expectations. Suppliers must also maintain stable magnetic characteristics, stack height, mechanical strength and dimensional consistency throughout long production runs. Consequently, long-term competitiveness requires not only press capacity but also strong die engineering, automation, process-control and quality-management capabilities.
Industry Chain Analysis
The upstream Automotive Motor Core industry chain consists mainly of non-grain-oriented electrical steel, insulation and bonding materials, precision die materials and specialized stamping and automation equipment. Electrical steel is the dominant functional material because its thickness, magnetic loss, flux-density characteristics, coating and mechanical properties directly influence both motor performance and manufacturing feasibility. Motor-core manufacturing then involves steel preparation or slitting, precision die development, high-speed stamping, stator and rotor lamination forming, stacking, interlocking, welding or bonding, dimensional inspection and other quality-control processes. More integrated suppliers may further extend into magnet molding, shaft assembly or other rotor and stator subassemblies. POSCO Mobility Solution explicitly identifies stator and rotor cores as essential elements determining e-motor efficiency, while Mitsui High-tec integrates proprietary precision tooling with core stamping and assembly technology.
Downstream customers primarily include traction-motor manufacturers, electric-drive system suppliers and automotive OEMs. Value creation is gradually shifting from basic lamination stamping toward integrated engineering capabilities involving precision die design, material-utilization optimization, advanced stacking, automated inspection and high-volume quality assurance. Raw-material costs remain important, but profitability is also influenced by stamping yield, scrap generation, die life, press utilization and the amortization of customer-specific tooling. Manufacturers that participate early in motor development and subsequently convert validated designs into stable mass production can generally establish stronger customer relationships and higher entry barriers.
Segment Insights
By product structure, stator cores and rotor cores constitute the fundamental segments of the Automotive Motor Core market. Although both rely on electrical-steel stamping and lamination technologies, their manufacturing requirements differ in slot geometry, concentricity, rotor mechanical strength, magnet accommodation and high-speed reliability. Permanent-magnet synchronous motor cores are an important mainstream product direction in electrified vehicles, while induction and other drive-motor architectures remain relevant for selected vehicle platforms. The coexistence of multiple motor technologies means that flexible die engineering and manufacturing capability remain important competitive attributes rather than the market converging entirely on a single core design.
By manufacturing technology, conventional interlocked and welded cores retain broad commercial use, while bonded and self-bonded Automotive Motor Core products represent an increasingly important high-performance direction. Bonding can reduce the need for localized mechanical deformation or weld points and can improve stacking and magnetic characteristics in suitable applications. POSCO Mobility Solution reports that its EMFree bonding approach can reduce core loss relative to embossed structures, while Mitsui High-tec identifies adhesive lamination as a method that improves magnetic characteristics by avoiding conventional interlocking and welding. As a result, process differentiation is increasingly moving from basic stamping capability toward thin-sheet processing, bonding technology, precision stacking and stable high-volume production.
Downstream Market Opportunities
Electrified passenger vehicles represent the principal downstream opportunity for Automotive Motor Core, while electrified commercial vehicles and diversified hybrid architectures provide additional demand. Higher-speed traction motors, high-voltage platforms and compact e-drive designs are increasing requirements for thin electrical steel, lower core loss, high dimensional consistency and reliable stacking technologies. At the same time, automakers continue to adopt different motor architectures according to vehicle positioning, performance targets, cost structures and supply-chain strategies. This creates opportunities for suppliers capable of supporting multiple core geometries, materials and stacking processes rather than relying on a single standardized product. The continuing expansion of electrified commercial vehicles may also increase demand for larger-diameter and higher-output motor-core configurations.
Regional Insights
China is one of the most important Automotive Motor Core demand and manufacturing regions, supported by the scale of its electrified vehicle industry and a relatively complete local supply chain spanning electrical steel, precision dies, motor cores, drive motors and integrated electric-drive systems. Electric cars accounted for close to 55% of new-car sales in China in 2025, and more than 13 million electric cars were sold during the year. This large downstream manufacturing base supports domestic Automotive Motor Core production and has encouraged suppliers to invest in higher-speed stamping, thin-sheet processing, bonding and integrated stator/rotor manufacturing capabilities.
Japan, South Korea and Europe retain strong positions in precision tooling, electrical steel and motor-core technology, while North America is becoming increasingly relevant as automakers and component suppliers localize electrified powertrain production. The industry's geographic structure is therefore developing toward multi-regional production networks located closer to major automotive and motor manufacturing clusters. Mitsui High-tec operates production capabilities across Japan, China and other Asian markets, Europe, North America and Latin America, reflecting a broader industry requirement for localized manufacturing combined with globally consistent tooling and quality standards.
Competitive Landscape Analysis
The Automotive Motor Core market has a diversified competitive structure comprising global precision-lamination specialists, steel-group-affiliated motor-core suppliers and Chinese precision-stamping manufacturers. Confirmed participants include Mitsui High-tec, EuroGroup Laminations, JFE, Tempel, R. Bourgeois, POSCO Mobility Solution, as well as Chinese manufacturers such as Lianbo Precision, Xinzhi Group, Zhenyu Technology, Huaxin Precision, Tongda Silicon Steel, Yuma Precision, Longsheng Technology, Shiri Electromechanical, Zhuoerbo, Shandong Boyuan and Jufeng Technology. Competitive positioning is not determined solely by stamping capacity. Key differentiators include progressive-die engineering, thin electrical-steel processing, material utilization, high-speed stamping stability, stacking and bonding technologies, automotive customer qualification, automation and the ability to replicate validated processes across production locations. Leading suppliers are also extending their capabilities from standalone laminations toward complete stator and rotor cores and selected subassemblies, increasing the importance of engineering collaboration and integrated manufacturing in future competition. Mitsui High-tec's integration of proprietary tooling with core production and POSCO Mobility Solution's development of advanced stacking and bonding technologies illustrate this broader shift toward technology- and process-driven competition.
Report Scope
This report is a detailed and comprehensive analysis for global Automotive Motor Core market. Both quantitative and qualitative analyses are presented by company, by region & country, by Type and by Application. As the market is constantly changing, this report explores the competition, supply and demand trends, as well as key factors that contribute to its changing demands across many markets. Company profiles and product examples of selected competitors, along with market share estimates of some of the selected leaders for the year 2025, are provided.
Key Features:
Global Automotive Motor Core market size and forecasts, in consumption value ($ Million), 2021-2032
Global Automotive Motor Core market size and forecasts by region and country, in consumption value ($ Million), 2021-2032
Global Automotive Motor Core market size and forecasts, by Type and by Application, in consumption value ($ Million), 2021-2032
Global Automotive Motor Core market shares of main players, in revenue ($ Million), 2021-2026
The Primary Objectives in This Report Are:
To determine the size of the total market opportunity of global and key countries
To assess the growth potential for Automotive Motor Core
To forecast future growth in each product and end-use market
To assess competitive factors affecting the marketplace
This report profiles key players in the global Automotive Motor Core market based on the following parameters - company overview, revenue, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include Mitsui High-tec, Inc., Jiangsu Lianbo Precision Technology Co., Ltd., EuroGroup Laminations S.p.A., Xinzhi Group Co., Ltd., JFE Shoji Corporation, Ningbo Zhenyu Technology Co., Ltd., Worthington Steel, Inc. (Tempel), R.Bourgeois S.A., POSCO Mobility Solution, Jiangyin Huaxin Precision Technology Corporation, etc.
This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.
Automotive Motor Core market is split by Type and by Application. For the period 2021-2032, the growth among segments provides accurate calculations and forecasts for Consumption Value by Type and by Application. This analysis can help you expand your business by targeting qualified niche markets.
Market segmentation
Market segment by Type
Welded Motor Core
Interlocking Motor Core
Buckle stack Motor Core
Bonding Motor Core
Market segment by Motor Technology
Permanent Magnet Synchronous Motor (PMSM)
Induction Motor (IM)
Electrically Excited Synchronous Motor (EESM)
Others
Market segment by Magnetic Flux Configuration
Radial Flux Motor Core
Axial Flux Motor Core
Others
Market segment by Application
NEV
PHEV
Market segment by players, this report covers
Mitsui High-tec, Inc.
Jiangsu Lianbo Precision Technology Co., Ltd.
EuroGroup Laminations S.p.A.
Xinzhi Group Co., Ltd.
JFE Shoji Corporation
Ningbo Zhenyu Technology Co., Ltd.
Worthington Steel, Inc. (Tempel)
R.Bourgeois S.A.
POSCO Mobility Solution
Jiangyin Huaxin Precision Technology Corporation
Nantong Tongda Silicon Steel Technology Co., Ltd.
YUMA Precision Technology (Jiangsu) Co., Ltd.
Wuxi Longsheng Technology Co., Ltd.
Zhejiang Shiri Electromechanical Technology Co., Ltd.
Zhuoerbo (Ningbo) Precision Electromechanical Co., Ltd.
Shandong Boyuan Precision Machinery Co., Ltd.
Zhejiang Jufeng Technology Co., Ltd.
Market segment by regions, regional analysis covers
North America (United States, Canada and Mexico)
Europe (Germany, France, UK, Russia, Italy and Rest of Europe)
Asia-Pacific (China, Japan, South Korea, India, Southeast Asia and Rest of Asia-Pacific)
South America (Brazil, Rest of South America)
Middle East & Africa (Turkey, Saudi Arabia, UAE, Rest of Middle East & Africa)
Chapter Outline
Chapter 1, to describe Automotive Motor Core product scope, market overview, market estimation caveats and base year.
Chapter 2, to profile the top players of Automotive Motor Core, with revenue, gross margin, and global market share of Automotive Motor Core from 2021 to 2026.
Chapter 3, the Automotive Motor Core competitive situation, revenue, and global market share of top players are analyzed emphatically by landscape contrast.
Chapter 4 and 5, to segment the market size by Type and by Application, with consumption value and growth rate by Type, by Application, from 2021 to 2032.
Chapter 6, 7, 8, 9, and 10, to break the market size data at the country level, with revenue and market share for key countries in the world, from 2021 to 2026.and Automotive Motor Core market forecast, by regions, by Type and by Application, with consumption value, from 2027 to 2032.
Chapter 11, market dynamics, drivers, restraints, trends, Porters Five Forces analysis.
Chapter 12, the key raw materials and key suppliers, and industry chain of Automotive Motor Core.
Chapter 13, to describe Automotive Motor Core research findings and conclusion.
Summary:
Get latest Market Research Reports on Automotive Motor Core. Industry analysis & Market Report on Automotive Motor Core is a syndicated market report, published as Global Automotive Motor Core Market 2026 by Company, Regions, Type and Application, Forecast to 2032. It is complete Research Study and Industry Analysis of Automotive Motor Core market, to understand, Market Demand, Growth, trends analysis and Factor Influencing market.