According to our (Global Info Research) latest study, the global Automotive Electric Power Steering System Motor market size was valued at US$ 2603 million in 2025 and is forecast to a readjusted size of US$ 3264 million by 2032 with a CAGR of 3.4% during review period.
An Automotive Electric Power Steering System Motor is the core electromechanical actuator of an automotive electric power steering system. Based on commands generated by the electronic control unit from steering-wheel torque, steering angle, vehicle speed and vehicle-dynamics information, the motor converts electrical energy into precisely controlled mechanical torque and transfers assistance to the steering column, pinion or rack through worm gears, pinions, belts, ball screws or other transmission mechanisms. As vehicle steering evolves from hydraulic assistance toward electromechanical assistance and ultimately steer-by-wire execution, the Automotive Electric Power Steering System Motor is becoming not only an energy-efficient assist device but also a critical actuator for vehicle lateral-motion control and intelligent chassis systems.
Key Findings
Global Automotive Electric Power Steering System Motor shipments reached 85.046 million units in 2025, with an average market price of US$29.74 per unit
China was the largest demand market with 30.159 million units in 2025, accounting for 35.46% of global shipments
Market Trends
The Automotive Electric Power Steering System Motor industry is shifting from penetration-driven growth toward architecture upgrading, higher output capability and increasing value per vehicle. Mature passenger-car EPS adoption leaves less room for simple replacement of hydraulic steering, while heavier electric vehicles, larger SUVs and pickups, wider tires and increasing front-axle loads are moving demand toward higher-output D-PEPS and R-EPS architectures. Brushless permanent-magnet motors are becoming the mainstream solution for new high-performance programs because of their efficiency, power density, controllability, durability and NVH advantages, while brushed motors are increasingly concentrated in cost-sensitive legacy platforms. The 12V architecture remains dominant in mainstream passenger vehicles, but 48V is becoming more relevant for high-output R-EPS, selected D-PEPS, heavy vehicle applications and Steer-by-Wire where lower current, thermal management and redundancy become increasingly important. At the same time, standalone motors are evolving toward integrated Motor-ECU Power Packs, transferring competitive differentiation from electromagnetic design alone toward electronics, thermal management, software, functional safety and system integration.
Steer-by-Wire represents the next major architectural transition. Instead of retaining a permanent mechanical steering connection, the technology separates hand-wheel feedback from road-wheel actuation and therefore increases requirements for redundant sensing, power supply, controllers, communication and actuation. Commercialization has progressed into series-production deployment, and current system architectures increasingly emphasize dual controllers, dual power supplies and redundant actuation paths to maintain steering functionality following a single-point failure. This transition expands the Automotive Electric Power Steering System Motor opportunity from one conventional assist motor toward hand-wheel actuators and road-wheel actuators with higher functional-safety content and potentially higher motor content per vehicle.
Market Dynamics
Drivers
Electrification, vehicle size growth and advanced driver-assistance functions are the principal structural drivers of the Automotive Electric Power Steering System Motor market. Battery-electric vehicles and large SUVs generally impose higher steering loads, increasing demand for higher continuous output, peak torque and thermal capability and supporting migration toward D-PEPS and R-EPS. ADAS functions such as automated parking, lane keeping and lane centering also transform EPS from a driver-assistance mechanism into an active lateral-motion actuator, raising requirements for response speed, torque accuracy, diagnostics and redundancy. Commercial-vehicle electrification adds another source of incremental demand as high-power motors and 24V/48V platforms extend pure electric steering into vans, logistics vehicles, light trucks and selected medium-duty vehicles. Policy direction is also supportive of higher-reliability chassis-by-wire technologies; China's Ministry of Industry and Information Technology-led Manufacturing Reliability Improvement Implementation Opinions explicitly identifies steer-by-wire and other chassis-by-wire systems as priority areas for automotive reliability improvement.
Restraints
The principal restraint is the maturity of conventional passenger-vehicle EPS. Penetration in North America, Europe, China, Japan and South Korea is already high, reducing the incremental volume available from further replacement of hydraulic steering and increasing the industry's dependence on vehicle production cycles. Mature C-EPS and selected P-EPS products also face sustained annual cost-down pressure from OEMs and steering Tier 1 suppliers. Vehicle programs typically remain in production for several years, while selling prices are subject to continuing commercial reductions even when raw-material, labor, depreciation and engineering costs do not decline at the same rate. This creates persistent margin pressure and favors suppliers able to use automation, platform commonality, localization and manufacturing-yield improvements to reduce cost.
Opportunities
The most attractive opportunities are concentrated in higher-value architectures rather than conventional low-output volume expansion. High-output R-EPS and D-PEPS benefit from heavier EVs, large SUVs and pickups, while commercial vehicles provide additional penetration headroom as pure electric steering expands beyond light-duty applications. Steer-by-Wire offers a second source of value growth by creating separate hand-wheel feedback and road-wheel actuation functions and introducing stronger redundancy requirements. The report estimates that Steer-by-Wire motors could rise from only 68 thousand units in 2025 to 16.801 million units by 2032, representing 16.08% of global Automotive Electric Power Steering System Motor shipments and 19.76% of revenue by that point. The opportunity therefore lies not only in incremental unit volume but also in higher motor power, greater electronics content, redundant architecture and higher value per vehicle.
Challenges
The market remains technically and commercially demanding because steering is a safety-critical function with long development and validation cycles. Suppliers are exposed to customer concentration, platform nomination risk and changes in make-versus-buy strategies at integrated steering Tier 1s. Loss of a major platform cannot normally be replaced quickly because motor, ECU, sensors, reduction mechanisms and vehicle-control strategies require extensive matching and validation before SOP. Material risks also remain significant: high-performance neodymium-iron-boron magnets, enamelled copper wire and non-oriented electrical steel are key inputs, and fluctuations in rare-earth, copper, steel and energy prices cannot always be transferred immediately to OEM customers. As products progress toward redundant EPS and Steer-by-Wire, functional-safety validation, fault tolerance, cybersecurity, production consistency and the capital intensity of automated manufacturing become increasingly important barriers to entry.
Industry Chain Analysis
The Automotive Electric Power Steering System Motor industry chain begins with electromagnetic and structural materials, particularly enamelled copper wire, rare-earth permanent magnets and non-oriented electrical steel, which have the greatest direct influence on motor cost, efficiency and power density. Midstream value creation covers electromagnetic design, stator stamping and winding, rotor and magnet assembly, shaft and bearing systems, power electronics, sensors, ECU integration, thermal design, software calibration and end-of-line functional testing. As Motor-ECU integration increases, value creation is gradually shifting toward complete mechatronic Power Packs rather than standalone electromagnetic components. Downstream, Automotive Electric Power Steering System Motors are predominantly sold through OEM-oriented B2B programs to steering-system suppliers or vehicle manufacturers. Commercialization typically requires supplier qualification, RFQ, technical evaluation, project nomination, prototype development, DV/PV validation, APQP, PPAP and pre-series production before vehicle SOP. This lengthy qualification process creates high switching costs and strong platform stickiness, while also making production utilization highly dependent on individual vehicle programs.
Report Scope
This report is a detailed and comprehensive analysis for global Automotive Electric Power Steering System Motor market. Both quantitative and qualitative analyses are presented by manufacturers, by region & country, by Type and by Application. As the market is constantly changing, this report explores the competition, supply and demand trends, as well as key factors that contribute to its changing demands across many markets. Company profiles and product examples of selected competitors, along with market share estimates of some of the selected leaders for the year 2025, are provided.
Key Features:
Global Automotive Electric Power Steering System Motor market size and forecasts, in consumption value ($ Million), sales quantity (K Units), and average selling prices (US$/Unit), 2021-2032
Global Automotive Electric Power Steering System Motor market size and forecasts by region and country, in consumption value ($ Million), sales quantity (K Units), and average selling prices (US$/Unit), 2021-2032
Global Automotive Electric Power Steering System Motor market size and forecasts, by Type and by Application, in consumption value ($ Million), sales quantity (K Units), and average selling prices (US$/Unit), 2021-2032
Global Automotive Electric Power Steering System Motor market shares of main players, shipments in revenue ($ Million), sales quantity (K Units), and ASP (US$/Unit), 2021-2026
The Primary Objectives in This Report Are:
To determine the size of the total market opportunity of global and key countries
To assess the growth potential for Automotive Electric Power Steering System Motor
To forecast future growth in each product and end-use market
To assess competitive factors affecting the marketplace
This report profiles key players in the global Automotive Electric Power Steering System Motor market based on the following parameters - company overview, sales quantity, revenue, price, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include NIDEC, Mitsubishi Electric Mobility, Bosch, DENSO, MAHLE, Brose, Taigene, MITSUBA, LG Innotek, Ningbo Dechang, etc.
This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.
Automotive Electric Power Steering System Motor market is split by Type and by Application. For the period 2021-2032, the growth among segments provides accurate calculations and forecasts for consumption value by Type, and by Application in terms of volume and value. This analysis can help you expand your business by targeting qualified niche markets.
Market Segmentation
Market segment by Type
C-EPS Motor
D-PEPS Motor
R-EPS Motor
P-EPS Motor
Steer-by-wire Motor
Market segment by Technology
Brushed DC Motor
Brushless DC Motor
Market segment by Power
Below 300W
300–500W
500–800W
Above 800W
Market segment by Application
Passenger car
Commercial Vehicle
Major players covered
NIDEC
Mitsubishi Electric Mobility
Bosch
DENSO
MAHLE
Brose
Taigene
MITSUBA
LG Innotek
Ningbo Dechang
SNT Motiv
Henglong Group
Welling
Powerful
Market segment by region, regional analysis covers
North America (United States, Canada, and Mexico)
Europe (Germany, France, United Kingdom, Russia, Italy, and Rest of Europe)
Asia-Pacific (China, Japan, Korea, India, Southeast Asia, and Australia)
South America (Brazil, Argentina, Colombia, and Rest of South America)
Middle East & Africa (Saudi Arabia, UAE, Egypt, South Africa, and Rest of Middle East & Africa)
Chapter Outline
Chapter 1, to describe Automotive Electric Power Steering System Motor product scope, market overview, market estimation caveats and base year.
Chapter 2, to profile the top manufacturers of Automotive Electric Power Steering System Motor, with price, sales quantity, revenue, and global market share of Automotive Electric Power Steering System Motor from 2021 to 2026.
Chapter 3, the Automotive Electric Power Steering System Motor competitive situation, sales quantity, revenue, and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the Automotive Electric Power Steering System Motor breakdown data are shown at the regional level, to show the sales quantity, consumption value, and growth by regions, from 2021 to 2032.
Chapter 5 and 6, to segment the sales by Type and by Application, with sales market share and growth rate by Type, by Application, from 2021 to 2032.
Chapter 7, 8, 9, 10 and 11, to break the sales data at the country level, with sales quantity, consumption value, and market share for key countries in the world, from 2021 to 2026.and Automotive Electric Power Steering System Motor market forecast, by regions, by Type, and by Application, with sales and revenue, from 2027 to 2032.
Chapter 12, market dynamics, drivers, restraints, trends, and Porters Five Forces analysis.
Chapter 13, the key raw materials and key suppliers, and industry chain of Automotive Electric Power Steering System Motor.
Chapter 14 and 15, to describe Automotive Electric Power Steering System Motor sales channel, distributors, customers, research findings and conclusion.
Summary:
Get latest Market Research Reports on Automotive Electric Power Steering System Motor. Industry analysis & Market Report on Automotive Electric Power Steering System Motor is a syndicated market report, published as Global Automotive Electric Power Steering System Motor Market 2026 by Manufacturers, Regions, Type and Application, Forecast to 2032. It is complete Research Study and Industry Analysis of Automotive Electric Power Steering System Motor market, to understand, Market Demand, Growth, trends analysis and Factor Influencing market.