According to our (Global Info Research) latest study, the global 5G PCB Special Ink market size was valued at US$ 152 million in 2025 and is forecast to a readjusted size of US$ 233 million by 2032 with a CAGR of 6.3% during review period.
5G PCB Special Ink, the fabrication and protection of high-frequency, high-speed and high-density printed circuit boards used in fifth-generation communication systems. The studied products primarily cover thermosetting direct-print ink, UV or UV-LED-curable ink and photoimageable imaging ink, with functional forms including low-loss solder resist, line and etch resist, via-plugging ink, marking ink and selected conductive or shielding ink. These materials are applied by screen printing, roller coating, spraying, curtain coating or digital inkjet and subsequently cured, exposed or developed to form temporary circuit patterns or permanent protective layers. Key performance indicators include dielectric constant and dissipation factor at a specified test frequency, moisture absorption, film thickness, line resolution, adhesion, insulation reliability, thermal cycling resistance, chemical resistance, LDI compatibility and jetting stability. The research scope focuses on specialty inks qualified or specifically engineered for 5G base stations, antennas, millimeter-wave modules, data communication equipment, intelligent terminals and industrial communication hardware.
Key Findings
In 2025, global 5G PCB Special Ink production reached approximately 25,776 MT, with an average global market price of around US$ 5,714 per MT.
Asia Pacific is the largest production and consumption region for specialty inks used on 5G and high speed PCBs
Low Dk low Df photoimageable solder resist is the principal high value segment for fine line communication boards
5G base stations antennas and data communication equipment form the core downstream demand cluster
Commercial supply is qualification driven with pricing quoted mainly per kilogram and differentiated by dielectric performance
Taiyo Ink Nan Ya Eternal Materials Rongda and Kuangshun have documented relevant low loss or 5G materials
Market Trends
The market is shifting from generic PCB inks toward application-specific formulations with lower transmission loss, reduced moisture absorption, finer imaging capability and more stable performance under high-frequency operating conditions. Dissipation factor is becoming a particularly important differentiator because solder resist contributes dielectric loss when it covers microstrip or grounded coplanar transmission lines. Rogers reports that conventional liquid photoimageable solder mask typically has a Dk of approximately 3.3–3.8 and a Df of about 0.025 at 1 GHz, while an IPC technical paper evaluated a low-loss solder mask with a Df of 0.0069–0.0079 at the same frequency. Rogers high-frequency PCB analysis IPC low-loss solder-mask study Product development is also moving toward LDI-compatible photoimageable inks, thinner coatings, UV-LED curing and selective inkjet deposition. On highly loss-sensitive RF traces, designers may use partial coverage or localized solder-mask dams instead of full coverage. Environmental development is progressing toward halogen-free, low-VOC and SVHC-free formulations, while digital application reduces coating steps and material waste. Nan Ya identifies low-Dk and low-Df LPI grades, and Taiyo Ink has disclosed low-transmission-loss materials for 5G communication equipment. Nan Ya PCB ink catalogue Taiyo Holdings annual report
Market Dynamics
Drivers
Demand is driven by the continued deployment of macro and small 5G base stations, Massive MIMO antennas, millimeter-wave modules, optical transmission systems, routers, switches, edge-computing equipment and high-speed servers. Higher operating frequencies and data rates increase the importance of signal integrity, impedance stability and dielectric-loss control, raising material requirements beyond those of conventional PCB inks. The migration toward HDI, multilayer and rigid-flex boards also supports demand for high-resolution photoimageable inks, LDI-compatible formulations and reliable via-plugging materials. Intelligent terminals, fixed wireless access equipment, private 5G networks, industrial gateways and C-V2X communication modules provide additional demand channels. Taiyo Ink has linked low-transmission-loss solder-resist development to 5G telecommunications, while Eternal Materials identifies dry-film solder mask, UV ink and related electronic materials as part of its 5G material portfolio. Eternal Materials investor presentation
Restraints
The market is constrained by the limited standardization of the term “5G PCB Special Ink.” Some products are marketed as low-Dk and low-Df solder resist, while others are positioned as high-reliability, LDI-compatible or high-frequency PCB ink without comparable dielectric specifications. Dk and Df values vary with test frequency, method, film thickness, color, moisture conditioning and degree of cure, making supplier comparisons difficult. In highly sensitive RF and millimeter-wave circuits, solder mask may be selectively removed from transmission lines because even a qualified coating can increase effective dielectric constant and insertion loss. Thin dry-film solder resist and coverlay materials also compete with liquid inks in applications requiring uniform thickness and fine openings. Customer qualification is lengthy because a formulation change can affect impedance, adhesion, plating resistance, assembly yield and long-term reliability. Demand is further exposed to telecom capital-expenditure cycles, base-station inventory adjustments and slower-than-expected millimeter-wave network deployment.
Opportunities
The principal opportunity is the commercialization of photoimageable solder resist with Df below 0.01 at a clearly defined high-frequency test condition. The IPC test vehicle showed that a low-loss solder mask could reduce dielectric loss by up to approximately 10% on an ultra-low-loss PPO-blend PCB compared with a conventional mask, illustrating the potential value of optimized formulations for high-speed communication boards. LDI-compatible wet-film ink, digital inkjet solder mask and UV-LED curing provide additional opportunities through finer registration, fewer process steps and lower material consumption. Other attractive directions include low-moisture formulations for antennas, low-warpage ink for thin HDI and package substrates, high-reliability via-fill ink, and conductive or shielding ink for integrated antenna structures. Halogen-free and SVHC-free chemistry creates a compliance-led replacement cycle; Sun Chemical’s latest PCB portfolio demonstrates the transition toward solder masks without specified SVHC photoinitiators and crosslinkers. Sun Chemical official release Future demand can also emerge from private 5G, C-V2X, satellite-based non-terrestrial networks and early 6G research platforms.
Challenges
Formulators must simultaneously achieve low dielectric loss, high insulation resistance, fine imaging, strong adhesion and resistance to plating, soldering heat, humidity and thermal cycling. Reducing polar groups and moisture absorption may improve electrical performance but can weaken alkaline development, substrate wetting or adhesion. PTFE, hydrocarbon-ceramic and other low-loss laminates can present low-surface-energy adhesion challenges, while thinner coatings require tighter control of pigment dispersion, filler particle size and film uniformity. Photoimageable products must balance exposure sensitivity with clean development and post-cure reliability; inkjet products additionally require controlled viscosity, surface tension, particle filtration and printhead compatibility. The absence of a universally applied high-frequency test protocol remains a major commercial risk: data measured at 1 MHz, 1 GHz and 10 GHz cannot be compared directly. Suppliers must therefore validate cured films within the customer’s actual stack-up, transmission-line geometry, surface finish and moisture condition. Raw-material regulation, photoinitiator availability, formulation confidentiality and long OEM approval cycles further increase development costs.
Industry Chain Analysis
The upstream chain comprises epoxy-acrylate, acrylic, polyimide and other engineered resin systems, reactive monomers and oligomers, photoinitiators, pigments, low-polarity fillers, solvents or water, and wetting, defoaming, adhesion and rheology additives. Resin molecular structure and filler selection determine dielectric loss, moisture absorption, thermal resistance and developability. Midstream manufacturers conduct resin synthesis, formulation, dispersion, filtration, contamination control, batch testing and application validation. Production must be coordinated with screen-printing, roller-coating, spray, curtain-coating or inkjet equipment, as well as UV lamps, UV-LED systems, LDI exposure units, ovens, developers and surface-treatment chemistries. Downstream customers are rigid-PCB, flexible-PCB, rigid-flex and IC-substrate manufacturers serving communications equipment OEMs. Material value is created through low-loss formulation design, consistent mass production, customer-specific color and viscosity adjustment, technical service and qualification support. Because ink represents a limited share of total PCB cost but can materially affect yield and signal integrity, approved suppliers gain strong customer retention. Commercial transactions are normally quoted by kilogram, with premiums determined by dielectric performance, imaging resolution, environmental compliance and qualification status.
Segment Insights
Thermosetting ink is directly printed and forms a resistant film through heating or solvent evaporation; it is commonly used for via plugging, marking and selected conventional solder-mask processes. It offers mature processing and relatively low formulation cost but requires longer oven cycles and greater VOC management. UV-curable ink is directly patterned and rapidly crosslinked under UV or UV-LED irradiation, providing high throughput and reduced solvent use for continuous production. Photoimageable imaging ink is coated over the board, selectively exposed through artwork or LDI, developed and normally post-cured. Although it also involves UV and thermal reactions, it should be reported separately because its defining characteristic is imagewise pattern formation rather than direct curing. Photoimageable ink represents the principal high-value route for fine solder-mask openings, HDI boards and low-Dk or low-Df communication-board applications. A complementary functional segmentation should distinguish low-loss solder resist, line and etch resist, via-plugging ink, marking ink, conductive and EMI-shielding ink, and temporary protection ink. Low-loss solder resist is the core 5G-specific segment, while the remaining categories support circuit formation, hole filling, traceability and functional integration.
Downstream Market Opportunities
5G base stations represent a major application through AAU, RRU, BBU, power-amplifier, filter and control PCBs, where long-term thermal, humidity and insulation reliability are critical. Antenna applications include Massive MIMO arrays, feed networks and phased-array modules requiring low dielectric loss, low moisture absorption and controlled solder-mask coverage. Millimeter-wave modules place the strictest requirements on thin-film uniformity, fine openings and high-frequency dielectric stability. Data communication equipment covers routers, switches, optical transmission systems, high-speed servers and edge-computing nodes, creating demand for multilayer and high-speed PCB-compatible inks. Intelligent terminals require fine-resolution LDI ink and via-fill materials for HDI, flexible and rigid-flex structures. Industrial communication opportunities include private-network base stations, gateways, robots and factory controllers, while additional demand arises from C-V2X modules, fixed wireless access equipment and satellite communication terminals. In loss-critical RF areas, market opportunity is associated with controlled selective coverage rather than indiscriminate full-board coating.
Regional Insights
Asia Pacific is the largest regional production and consumption center because China, Japan, Taiwan and South Korea combine large PCB manufacturing capacity with established electronic-material supply chains. Japan retains a leading position in high-performance solder resist, resin technology and process reliability. Taiwan combines PCB, IC-substrate and ink manufacturing capabilities, with Nan Ya and Eternal Materials offering relevant low-loss or 5G-oriented products. China is the largest localization opportunity, supported by Rongda, Kuangshun and other domestic PCB-ink suppliers moving toward Low Dk/Df, LDI and high-resolution products. South Korea is important for communication equipment, flexible circuits and package substrates. Southeast Asia is becoming a major incremental production base: the Taiwan Printed Circuit Association reported regional PCB output of US$11.55 billion in 2025, up 32.0% year on year and equal to 12.3% of global PCB production; these figures describe regional PCB output rather than 5G PCB Special Ink revenue. Taiwan Printed Circuit Association regional index North America and Europe remain smaller-volume but technically attractive markets for RF, aerospace, defense and advanced data-communication applications.
Competitive Landscape Analysis
The core target-product group consists of Taiyo Ink, Nan Ya Plastics, Eternal Materials, Shenzhen RongDa Photosensitive Science & Technology and Jiangsu Kuangshun Photosensitivity New-Material Stock. These companies have disclosed low-transmission-loss, Low Dk/Df or explicitly 5G-related PCB materials. Nan Ya’s catalogue identifies LP-4G grades with low-Dk and low-Df characteristics, while Shenzhen Stock Exchange disclosures identify Low Dk/Df products at Rongda and Kuangshun. Rongda regulatory filing Kuangshun regulatory filing The expanded capable manufacturer pool includes Peters Group, GOO Chemical, Sun Chemical, Electra Polymers, Tamura Corporation, Resonac, Seoul Chemical Research Laboratory, Greencure Technology, Agfa, Nippon Polytech, Shenzhen Berihe New Materials Development, Guangdong SQ UV Curing Materials and Guangdong Coants Electronic Materials. These participants have established solder-resist, photoimageable, inkjet, flexible-circuit or high-density-substrate product capabilities, although not all publicly identify a dedicated 5G grade.
Report Scope
This report is a detailed and comprehensive analysis for global 5G PCB Special Ink market. Both quantitative and qualitative analyses are presented by manufacturers, by region & country, by Type and by Application. As the market is constantly changing, this report explores the competition, supply and demand trends, as well as key factors that contribute to its changing demands across many markets. Company profiles and product examples of selected competitors, along with market share estimates of some of the selected leaders for the year 2025, are provided.
Key Features:
Global 5G PCB Special Ink market size and forecasts, in consumption value ($ Million), sales quantity (Tons), and average selling prices (US$/Ton), 2021-2032
Global 5G PCB Special Ink market size and forecasts by region and country, in consumption value ($ Million), sales quantity (Tons), and average selling prices (US$/Ton), 2021-2032
Global 5G PCB Special Ink market size and forecasts, by Type and by Application, in consumption value ($ Million), sales quantity (Tons), and average selling prices (US$/Ton), 2021-2032
Global 5G PCB Special Ink market shares of main players, shipments in revenue ($ Million), sales quantity (Tons), and ASP (US$/Ton), 2021-2026
The Primary Objectives in This Report Are:
To determine the size of the total market opportunity of global and key countries
To assess the growth potential for 5G PCB Special Ink
To forecast future growth in each product and end-use market
To assess competitive factors affecting the marketplace
This report profiles key players in the global 5G PCB Special Ink market based on the following parameters - company overview, sales quantity, revenue, price, gross margin, product portfolio, geographical presence, and key developments. Key companies covered as a part of this study include Taiyo Ink, Nan Ya Plastics Corp, Peters Group, Shenzhen RongDa Photosensitive Science & Technology, Jiangsu Kuangshun Photosensitivity New-material Stock, GOO CHEMICAL, Sun Chemical, Eternal Materials, Shenzhen Best Chemistry New Materials, Guangdong SQ UV Curing Materials, etc.
This report also provides key insights about market drivers, restraints, opportunities, new product launches or approvals.
5G PCB Special Ink market is split by Type and by Application. For the period 2021-2032, the growth among segments provides accurate calculations and forecasts for consumption value by Type, and by Application in terms of volume and value. This analysis can help you expand your business by targeting qualified niche markets.
Market Segmentation
Market segment by Type
Thermosetting Ink
UV Curable Ink
Photosensitive Imaging Ink
Market segment by Coating Method
Screen Printing Type
Spray Type
Other
Market segment by Line Width
Line Width<50μm
Line Width 50-100μm
Line Width>100μm
Market segment by Application
5G Base Station
5G Antenna
Millimeter Wave Module
Data Communication Equipment
5G Intelligent Terminal
Industrial Communication
Other
Major players covered
Taiyo Ink
Nan Ya Plastics Corp
Peters Group
Shenzhen RongDa Photosensitive Science & Technology
Jiangsu Kuangshun Photosensitivity New-material Stock
GOO CHEMICAL
Sun Chemical
Eternal Materials
Shenzhen Best Chemistry New Materials
Guangdong SQ UV Curing Materials
New East New Materials
Guangdong Coants Electronic Materials
Market segment by region, regional analysis covers
North America (United States, Canada, and Mexico)
Europe (Germany, France, United Kingdom, Russia, Italy, and Rest of Europe)
Asia-Pacific (China, Japan, Korea, India, Southeast Asia, and Australia)
South America (Brazil, Argentina, Colombia, and Rest of South America)
Middle East & Africa (Saudi Arabia, UAE, Egypt, South Africa, and Rest of Middle East & Africa)
Chapter Outline
Chapter 1, to describe 5G PCB Special Ink product scope, market overview, market estimation caveats and base year.
Chapter 2, to profile the top manufacturers of 5G PCB Special Ink, with price, sales quantity, revenue, and global market share of 5G PCB Special Ink from 2021 to 2026.
Chapter 3, the 5G PCB Special Ink competitive situation, sales quantity, revenue, and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the 5G PCB Special Ink breakdown data are shown at the regional level, to show the sales quantity, consumption value, and growth by regions, from 2021 to 2032.
Chapter 5 and 6, to segment the sales by Type and by Application, with sales market share and growth rate by Type, by Application, from 2021 to 2032.
Chapter 7, 8, 9, 10 and 11, to break the sales data at the country level, with sales quantity, consumption value, and market share for key countries in the world, from 2021 to 2026.and 5G PCB Special Ink market forecast, by regions, by Type, and by Application, with sales and revenue, from 2027 to 2032.
Chapter 12, market dynamics, drivers, restraints, trends, and Porters Five Forces analysis.
Chapter 13, the key raw materials and key suppliers, and industry chain of 5G PCB Special Ink.
Chapter 14 and 15, to describe 5G PCB Special Ink sales channel, distributors, customers, research findings and conclusion.
Summary:
Get latest Market Research Reports on Taiyo Ink
Nan Ya Plastics Corp
Peters Group
Shenzhen RongDa Photosensitive Science & Technology
Jiangsu Kuangshun Photosensitivity New-material Stock
GOO CHEMICAL
Sun Chemical
Eternal Materials
Shenzhen Best Chemistry New Mat. Industry analysis & Market Report on Taiyo Ink
Nan Ya Plastics Corp
Peters Group
Shenzhen RongDa Photosensitive Science & Technology
Jiangsu Kuangshun Photosensitivity New-material Stock
GOO CHEMICAL
Sun Chemical
Eternal Materials
Shenzhen Best Chemistry New Mat is a syndicated market report, published as Global 5G PCB Special Ink Market 2026 by Manufacturers, Regions, Type and Application, Forecast to 2032. It is complete Research Study and Industry Analysis of Taiyo Ink
Nan Ya Plastics Corp
Peters Group
Shenzhen RongDa Photosensitive Science & Technology
Jiangsu Kuangshun Photosensitivity New-material Stock
GOO CHEMICAL
Sun Chemical
Eternal Materials
Shenzhen Best Chemistry New Mat market, to understand, Market Demand, Growth, trends analysis and Factor Influencing market.