Report Detail
Global Injection Molded Plastics Market Research Report 2019
- RnM2873597 |
- 04 February, 2019 |
- Global |
- 109 Pages |
- QYResearch |
- Other
This report studies the Injection Molded Plastics market. In the plastic molding process, plastic resins are used in pellet or granular form. Choice of plastic type depends on the kind of product being made, its requirements and the overall budget. Of the hundreds of available plastics, only a few are safe for consumer use. Some of the ones used in the plastic injection molding process include polystyrene, polycarbonate, polypropylene, polyethylene, polyamide, polyvinyl chloride and acrylic.
The technical barriers of Injection Molded Plastics are relatively low, resulting in low level concentration degree. The manufacturing bases scatter around the world, mainly concentrating in Korea, China and Japan. The key companies in Injection Molded Plastics market include: BASF, Dow, ExxonMobil, SABIC, Sinopec, etc.
Injection Molded Plastics is widely used in Packaging, Automotive, Consumer Goods and others. In 2016, Injection Molded Plastics for Packaging and Consumer Goods occupy more than 60% of total amount. Packaging was the single largest application segment for Injection Molded Plastics market accounting for more than 30.54% of global consumption in 2016. The growing Packaging industry in China, India and Japan is expected to boost the demand for tires which in turn is expected to drive the Injection Molded Plastics market over the forecast period. Therefore, increasing demand for Injection Molded Plastics in tire manufacturing is expected to support the growth of this market over forecast period. Injection Molded Plastics industry will usher in a stable growth space.
The global Injection Molded Plastics market is valued at xx million US$ in 2018 is expected to reach xx million US$ by the end of 2025, growing at a CAGR of xx% during 2019-2025.
This report focuses on Injection Molded Plastics volume and value at global level, regional level and company level. From a global perspective, this report represents overall Injection Molded Plastics market size by analyzing historical data and future prospect. Regionally, this report focuses on several key regions: North America, Europe, China and Japan.
At company level, this report focuses on the production capacity, ex-factory price, revenue and market share for each manufacturer covered in this report.
The following manufacturers are covered:
DOW
ExxonMobil
SABIC
BASF
Sinopec
DuPont
Honeywell
Lanxess
Ineos
Borealis
NOVA Chemicals
Chevron Phillips Chemical
Teijin
Shin-Etsu Chemical
Mitsubishi
Evonik
Segment by Regions
North America
Europe
China
Japan
Segment by Type
Polypropylene (PP)
ABS
HDPE
Polystyrene(PS)
Other
Segment by Application
Automotive
Packaging
Consumer Goods
Healthcare
Others
Table of Contents
Executive Summary
1 Injection Molded Plastics Market Overview
- 1.1 Product Overview and Scope of Injection Molded Plastics
- 1.2 Injection Molded Plastics Segment by Type
- 1.2.1 Global Injection Molded Plastics Production Growth Rate Comparison by Type (2014-2025)
- 1.2.2 Polypropylene (PP)
- 1.2.3 ABS
- 1.2.4 HDPE
- 1.2.5 Polystyrene(PS)
- 1.2.6 Other
- 1.3 Injection Molded Plastics Segment by Application
- 1.3.1 Injection Molded Plastics Consumption Comparison by Application (2014-2025)
- 1.3.2 Automotive
- 1.3.3 Packaging
- 1.3.4 Consumer Goods
- 1.3.5 Healthcare
- 1.3.6 Others
- 1.3 Global Injection Molded Plastics Market by Region
- 1.3.1 Global Injection Molded Plastics Market Size Region
- 1.3.2 North America Status and Prospect (2014-2025)
- 1.3.3 Europe Status and Prospect (2014-2025)
- 1.3.4 China Status and Prospect (2014-2025)
- 1.3.5 Japan Status and Prospect (2014-2025)
- 1.3.6 Southeast Asia Status and Prospect (2014-2025)
- 1.3.7 India Status and Prospect (2014-2025)
- 1.4 Global Injection Molded Plastics Market Size
- 1.4.1 Global Injection Molded Plastics Revenue (2014-2025)
- 1.4.2 Global Injection Molded Plastics Production (2014-2025)
2 Global Injection Molded Plastics Market Competition by Manufacturers
- 2.1 Global Injection Molded Plastics Production Market Share by Manufacturers (2014-2019)
- 2.2 Global Injection Molded Plastics Revenue Share by Manufacturers (2014-2019)
- 2.3 Global Injection Molded Plastics Average Price by Manufacturers (2014-2019)
- 2.4 Manufacturers Injection Molded Plastics Production Sites, Area Served, Product Types
- 2.5 Injection Molded Plastics Market Competitive Situation and Trends
- 2.5.1 Injection Molded Plastics Market Concentration Rate
- 2.5.2 Injection Molded Plastics Market Share of Top 3 and Top 5 Manufacturers
- 2.5.3 Mergers & Acquisitions, Expansion
3 Global Injection Molded Plastics Production Market Share by Regions
- 3.1 Global Injection Molded Plastics Production Market Share by Regions
- 3.2 Global Injection Molded Plastics Revenue Market Share by Regions (2014-2019)
- 3.3 Global Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 3.4 North America Injection Molded Plastics Production
- 3.4.1 North America Injection Molded Plastics Production Growth Rate (2014-2019)
- 3.4.2 North America Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 3.5 Europe Injection Molded Plastics Production
- 3.5.1 Europe Injection Molded Plastics Production Growth Rate (2014-2019)
- 3.5.2 Europe Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 3.6 China Injection Molded Plastics Production (2014-2019)
- 3.6.1 China Injection Molded Plastics Production Growth Rate (2014-2019)
- 3.6.2 China Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 3.7 Japan Injection Molded Plastics Production (2014-2019)
- 3.7.1 Japan Injection Molded Plastics Production Growth Rate (2014-2019)
- 3.7.2 Japan Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
4 Global Injection Molded Plastics Consumption by Regions
- 4.1 Global Injection Molded Plastics Consumption by Regions
- 4.2 North America Injection Molded Plastics Consumption (2014-2019)
- 4.3 Europe Injection Molded Plastics Consumption (2014-2019)
- 4.4 China Injection Molded Plastics Consumption (2014-2019)
- 4.5 Japan Injection Molded Plastics Consumption (2014-2019)
5 Global Injection Molded Plastics Production, Revenue, Price Trend by Type
- 5.1 Global Injection Molded Plastics Production Market Share by Type (2014-2019)
- 5.2 Global Injection Molded Plastics Revenue Market Share by Type (2014-2019)
- 5.3 Global Injection Molded Plastics Price by Type (2014-2019)
- 5.4 Global Injection Molded Plastics Production Growth by Type (2014-2019)
6 Global Injection Molded Plastics Market Analysis by Applications
- 6.1 Global Injection Molded Plastics Consumption Market Share by Application (2014-2019)
- 6.2 Global Injection Molded Plastics Consumption Growth Rate by Application (2014-2019)
7 Company Profiles and Key Figures in Injection Molded Plastics Business
- 7.1 DOW
- 7.1.1 DOW Injection Molded Plastics Production Sites and Area Served
- 7.1.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.1.3 DOW Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.1.4 Main Business and Markets Served
- 7.2 ExxonMobil
- 7.2.1 ExxonMobil Injection Molded Plastics Production Sites and Area Served
- 7.2.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.2.3 ExxonMobil Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.2.4 Main Business and Markets Served
- 7.3 SABIC
- 7.3.1 SABIC Injection Molded Plastics Production Sites and Area Served
- 7.3.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.3.3 SABIC Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.3.4 Main Business and Markets Served
- 7.4 BASF
- 7.4.1 BASF Injection Molded Plastics Production Sites and Area Served
- 7.4.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.4.3 BASF Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.4.4 Main Business and Markets Served
- 7.5 Sinopec
- 7.5.1 Sinopec Injection Molded Plastics Production Sites and Area Served
- 7.5.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.5.3 Sinopec Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.5.4 Main Business and Markets Served
- 7.6 DuPont
- 7.6.1 DuPont Injection Molded Plastics Production Sites and Area Served
- 7.6.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.6.3 DuPont Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.6.4 Main Business and Markets Served
- 7.7 Honeywell
- 7.7.1 Honeywell Injection Molded Plastics Production Sites and Area Served
- 7.7.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.7.3 Honeywell Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.7.4 Main Business and Markets Served
- 7.8 Lanxess
- 7.8.1 Lanxess Injection Molded Plastics Production Sites and Area Served
- 7.8.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.8.3 Lanxess Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.8.4 Main Business and Markets Served
- 7.9 Ineos
- 7.9.1 Ineos Injection Molded Plastics Production Sites and Area Served
- 7.9.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.9.3 Ineos Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.9.4 Main Business and Markets Served
- 7.10 Borealis
- 7.10.1 Borealis Injection Molded Plastics Production Sites and Area Served
- 7.10.2 Injection Molded Plastics Product Introduction, Application and Specification
- 7.10.3 Borealis Injection Molded Plastics Production, Revenue, Price and Gross Margin (2014-2019)
- 7.10.4 Main Business and Markets Served
- 7.11 NOVA Chemicals
- 7.12 Chevron Phillips Chemical
- 7.13 Teijin
- 7.14 Shin-Etsu Chemical
- 7.15 Mitsubishi
- 7.16 Evonik
8 Injection Molded Plastics Manufacturing Cost Analysis
- 8.1 Injection Molded Plastics Key Raw Materials Analysis
- 8.1.1 Key Raw Materials
- 8.1.2 Price Trend of Key Raw Materials
- 8.1.3 Key Suppliers of Raw Materials
- 8.2 Proportion of Manufacturing Cost Structure
- 8.3 Manufacturing Process Analysis of Injection Molded Plastics
- 8.4 Injection Molded Plastics Industrial Chain Analysis
9 Marketing Channel, Distributors and Customers
- 9.1 Marketing Channel
- 9.1.1 Direct Marketing
- 9.1.2 Indirect Marketing
- 9.2 Injection Molded Plastics Distributors List
- 9.3 Injection Molded Plastics Customers
10 Market Dynamics
- 10.1 Market Trends
- 10.2 Opportunities
- 10.3 Market Drivers
- 10.4 Challenges
- 10.5 Influence Factors
11 Global Injection Molded Plastics Market Forecast
- 11.1 Global Injection Molded Plastics Production, Revenue Forecast
- 11.1.1 Global Injection Molded Plastics Production Growth Rate Forecast (2019-2025)
- 11.1.2 Global Injection Molded Plastics Revenue and Growth Rate Forecast (2019-2025)
- 11.1.3 Global Injection Molded Plastics Price and Trend Forecast (2019-2025)
- 11.2 Global Injection Molded Plastics Production Forecast by Regions (2019-2025)
- 11.2.1 North America Injection Molded Plastics Production, Revenue Forecast (2019-2025)
- 11.2.2 Europe Injection Molded Plastics Production, Revenue Forecast (2019-2025)
- 11.2.3 China Injection Molded Plastics Production, Revenue Forecast (2019-2025)
- 11.2.4 Japan Injection Molded Plastics Production, Revenue Forecast (2019-2025)
- 11.3 Global Injection Molded Plastics Consumption Forecast by Regions (2019-2025)
- 11.3.1 North America Injection Molded Plastics Consumption Forecast (2019-2025)
- 11.3.2 Europe Injection Molded Plastics Consumption Forecast (2019-2025)
- 11.3.3 China Injection Molded Plastics Consumption Forecast (2019-2025)
- 11.3.4 Japan Injection Molded Plastics Consumption Forecast (2019-2025)
- 11.4 Global Injection Molded Plastics Production, Revenue and Price Forecast by Type (2019-2025)
- 11.5 Global Injection Molded Plastics Consumption Forecast by Application (2019-2025)
12 Research Findings and Conclusion
13 Methodology and Data Source
- 13.1 Methodology/Research Approach
- 13.1.1 Research Programs/Design
- 13.1.2 Market Size Estimation
- 13.1.3 Market Breakdown and Data Triangulation
- 13.2 Data Source
- 13.2.1 Secondary Sources
- 13.2.2 Primary Sources
- 13.3 Author List
Summary:
Get latest Market Research Reports on Injection Molded Plastics . Industry analysis & Market Report on Injection Molded Plastics is a syndicated market report, published as Global Injection Molded Plastics Market Research Report 2019. It is complete Research Study and Industry Analysis of Injection Molded Plastics market, to understand, Market Demand, Growth, trends analysis and Factor Influencing market.
REPORT YOU MIGHT BE INTERESTED
Related Reports
Reason to Buy
Reports and Markets
Contact Us
+1-352-353-0818 (US)Newsletter
KEEP UP TO DATE ON ALL THE LATEST REPORTS
